View Single Post
Old 01-27-2014, 10:54   #1 (permalink)
gsaara
No Life Poster
 
Join Date: Oct 2010
Posts: 2,335
Member: 1418524
Status: Offline
Thanks Meter: 184
s5360 dead boot flash problem

EasyJtag Suite ver.: 1.0.99.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
Successefuly connected to box on COM10
Box S/N: ===========, ,FW Ver.: 01.48
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : ========= , ver: 22
Loading repair file: 'E:\soft ware\EasyJtag\Repair file\GT-S5360\Samsung GT-S5360.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-S5360, Ver.: 1.00
Error loading information!
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.99.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5360 Config ver.:1.00
I/O Level set to : 3000 mV
Box S/N: ============= ,FW Ver.: 01.48
Connecting to Target...
JTAG device: BCM21553
CPU IDCODE : 0x07B3617F Mfg.: 0x0bf, Part: 0x7b36, Ver.: 0x0
CPU Manufacturer: SST/Broadcom , CPU Name: BCM21553
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
Error: Memory read access failed.
DCC Loader init Failed!
BUG: unknown controller initialization failure
  Reply With Quote
 
Page generated in 0.13577 seconds with 6 queries