[Tanha0321]

MXBOX GREEN

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 5], SN: C085DE08
Using device: USB Phonet  and HTI, FW ver: 00.50, SN: 0000F555
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.84 
Module ver: 1.0.0.21719(09-05-2013), Library ver: 1.0.0.14397(09-05-2013)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
 Boot mode: 0xCC
 EBL version major/minor: 10.37
 EBL version: Quantum_Bootloader_10.37_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
 Flash settings: 0/1024, size: 0x04000000
 1 Block regions:
  512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD__back.RPL" 
Processing file: FEBD2E18_rm872__04.52.mcusw
 Downloading item CODE:rm872__04.52.mcusw_ebl_psi.fls, num block: 4, size: 25.25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.390 s
Erasing area 0x40280000-0x41A7FFFE ...OK
Programming completed in 28.954 s
Checksum verified (0xFA4D)
Processing file: 3265D915_rm872__04.52.ppm_m2
 Downloading item CUST:package_m2.ppm_ebl_psi.fls, num block: 1, size: 3.78 MB
Erasing area 0x41A80000-0x41E468EE ...OK
Programming completed in 4.797 s
Checksum verified (0xC9E6)
Processing file: 81DD7A9E_rm872__04.52.image_m2_059Q8L5
 Downloading item CUST:package_m2_059Q8L5.image.fls, num block: 1, size: 16.25 MB
Erasing area 0x42100000-0x43E1FFFE ...OK
Programming completed in 25.156 s
Checksum verified (0xA5A8)
Total time for flashing process(boot+erase+write) was 8 min 36.578 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ... 
Waiting for device boot up ...
Device connected: nmwcdc\Nokia X2-02 USB Phonet, PORT_ID: 356352055749241
Verifying communication to device OK.
 
 
 
Phone type: RM-872 (206)
SW version: V 04.52 30-06-13 RM-872 (c) Nokia             
Imei plain: 35635205574924-1
Product code: 059Q4J7
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
Camera config: 0FD00F22004004, ver: 
MMC password: asif
 
RPL saved to "C:\mobileEx\3.5\data\backup\BB5_RM-872_356352055749241_13_02_14_183957_SIM.RPL" 
SIMLOCK seems to be valid
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed
 
 
Imei net: 35635205574924
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
 
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000004000B
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

ATF

1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly...


Infineon USB Boot: F00A1FB300020303010100FF
Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Setting Transmission Speed Done...
Flash Chip Manufacturer: Intel Electronics Corp.
Flash Boot Successful...
Unique Data: 12200C01A0012827
Original Product Code: 059Q4J7
Reading : CCC... OK!
Reading : HWC... OK!
Reading : NPC... OK!
RPL Backup was Successful...
 Plain RPL saved to:
 C:\AdvanceBox Turbo Flasher\Nokia\Backup\356352055749241\356352055749241_62735.rpl
Certificate Block Saved to:
 C:\AdvanceBox Turbo Flasher\Nokia\Backup\356352055749241\356352055749241_CERTIFICATE_F8BE004C.bin

Data Sections : 04
Current File    : FEBD2E18_rm872__04.52.mcusw
Compile Name: rm872__04.52.mcusw_ebl_psi.fls
Image Type   : Main Firmware
Data Size       : 26480008 Bytes

Sending Certificate Block
FIRMWARE Certificate Block Sent Successfully...
 Processing Section 01
FIRMWARE Erase Block: 0x40000000~0x4001FFFE
Start Erasing...
Erasing Please Wait...
ERROR: Erasing Failed

INFINITY BEST

Core : v1.82 , BB5XG FlashEngine : v9.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : FEBD2E18_rm872__04.52.mcusw
PPM : 3265D915_rm872__04.52.ppm_m2
CNT : 81DD7A9E_rm872__04.52.image_m2_059Q8L5
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.53_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 356352055749241
IMEI 2 : 356352055749258
PCcode : 059Q4J7

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\356352055749241_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : FEBD2E18_rm872__04.52.mcusw
Image : rm872__04.52.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:01 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:01 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:06 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ... 
Erase done, time : 00:02:05 
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:31
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
[ERR_ReqFlashEraseStart] : 0E00AD0400000A00
Error...
-> Check cable, flashfile, try again from this file

Connect phone on selected interface...