Cherry Mobile SkyFire 2.0 No Power Successfully Revive via ATF JTAG
PHONE STATUS is NO POWER TOOLS:
- ATF NITRO or ATF BOX (JTAG ACTIVATED)
- Modified RJ45 Fbus Cable
- CA-101 usb cable (for phone power supply)
FILES NEEDED: Download here: CHERRY_MOBILE_SKYFIRE_20_FACTORY.afp PROCEDURE:
- disassemble phone first
- soldered the pinout with MODIFIED RJ45 Fbus cable to Phone board
PINOUT:
- after soldered pinout connect Phone to Box using modified rj45 Fbus cable
- then connect phone also to PC using CA-101 usb cable that server as your power supply
now run ATF JTAG software
- Click
SELECT PHONE and browse the file
CHERRY_MOBILE_SKYFIRE_20_FACTORY.afp
- click
RESET JTAG to check the phone connections to Box
- now click
RESTORE BOOT for flashing or restoring the phone
patience is Needed Flashing will take 40 minutes to finish
( while Flashing sit back and relax while eating Chocolate sundae
)
FINISH FLASHING
- after Flashing do format the phone by pressing and holding
VOLUME UP and
POWER BUTTON until phone screen become
RED SCREEN DISPLAY.
- select
WIPE DATA / FACTORY RESET then press power button
- then
YES - - DELETE ALL USER DATA then press power button
- select
REBOOT SYSTEM NOW then press power button
after Format wipe data Phone is now OK.
IMEI is still intact no need rebuild IMEI in my case and in my procedure
Phone info after flashing .
Now phone is fully working
- working on 2 diffent simcard
- all functions is ok like CAMERA and wifi
Br,
Xeven2nd