View Single Post
Old 03-19-2014, 17:33   #5 (permalink)
No Life Poster
gcceleghg's Avatar
Join Date: Jun 2012
Location: Arg
Posts: 4,783
Member: 1766567
Status: Offline
Thanks Meter: 1,711
To update follow this steps:

You need:
- Samsung Galaxy Trend Duos GT-S7392 Stock Firmware Package.
Download S7392DDUAMJ4 ODDAMJ1 India Android zip
Download S7392DDUAML1 ODDAML1 India zip

- Odin3 Flasher.
Odin307 - Download - 4shared

- Samsung GT-S7392 USB Drivers.
Download USB Drivers exe

- Turn off the device, And take out its battery, SIM and memory cards.
- Run Odin3.exe program.
- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.
- Click PIT button to select: kyleve.pit

- Firmware files selection:
Click Bootloader button to select: BOOTLOADER_S7392xxxxxxx_...REV00_user_low_ship.tar .md5
Click PDA button to select: CODE_S7392xxxxxxx_...REV00_user_low_ship.tar.md5
Click Phone button to select: MODEM_S7392xxxxxxx_...REV00_user_low_ship.tar.md5
Click CSC button to select: 5

- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.
- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).
- Click on Start button.
- Odin program will start installing the new firmware files into your device, So wait until the device reboots.
- If the update was successfully done, Then you will notice PASS! Word at Odin program.
- Disconnect the USB cable.
- Check your device firmware version *#1234# (You should see the new installed one).
- Turn off the device again, Reinsert the SIM and memory cards and turn it on.
- Now you can customize your device after installing the new firmware version.
- If you made any backup of your device data before the update then you can restore it again.
- Done.

Notice: When you get one big file inside the firmware package, Then it should be selected as a PDA file only, And do not check Re-Partition option or use PIT file at all.
  Reply With Quote
The Following User Says Thank You to gcceleghg For This Useful Post:
Page generated in 0.11439 seconds with 6 queries