[FULL_ERASE]

I have a problem in the last procedure which is writing emmc

I read all the logs all of them writing and had a emmc_bin like this

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 117 kB/s
Done !!!

But when i about to write the EMMC i only have this kind of bin (EMMC_00000000_00080000)

Instead of this like others (Writing 000000200000 bytes to 00000000)

Can anyone tell me if i do it wrong

Here's my logs

EasyJtag Suite ver.: 1.0.105.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1), 64-bit edition.
Successefuly connected to box on COM17
Box S/N: 0D003020E2DC2815, ,FW Ver.: 01.48
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial :FULL_ERASE , ver: 22

Successfully connected to box on COM17
Box S/N: 0D003020E2DC2815, ,FW Ver.: 01.48
Z3X EasyJtag Software ver. 1.0.105.0
Loading eMMC Addon Firmware...
CMD Pullup Level:1402 mV
CMD Active Level:1722 mV
Can't Init EMMC !!! ( Ready Condition TIMEOUT! )
eMMC Card initialisation error!

Successfully connected to box on COM17
Box S/N: FULL_ERASE, ,FW Ver.: 01.48
Z3X EasyJtag Software ver. 1.0.105.0
Loading eMMC Addon Firmware...
CMD Pullup Level:1247 mV
CMD Active Level:1711 mV
EMMC CID 15010056545530304DF12F665B0E9FF1
EMMC CSD D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2012 FW rev.0xf1
EMMC NAME: VTU00M , S/N: 795237134
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_ 795237134_20140204_2042.extcsd
Done.
Running:SAMSUNG: Smart Factory Reset + Format...

Successfully connected to box on COM17
Box S/N: FULL_ERASE, ,FW Ver.: 01.48
Z3X EasyJtag Software ver. 1.0.105.0
Loading eMMC Addon Firmware...
CMD Pullup Level:1237 mV
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF12F665B0E9FF1
EMMC CSD D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2012 FW rev.0xf1
EMMC NAME: VTU00M , S/N: 795237134
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_ 795237134_20140204_2044.extcsd
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!!!
Done.
Please don't forget to repair extCSD from backup!!!
Running:SAMSUNG: MoviNAND Format...

Successfully connected to box on COM17
Box S/N: FULL_ERASE, ,FW Ver.: 01.48
Z3X EasyJtag Software ver. 1.0.105.0
Loading eMMC Addon Firmware...
CMD Pullup Level:1227 mV
CMD Active Level:1680 mV
EMMC CID 15010056545530304DF12F665B0E9FF1
EMMC CSD D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2012 FW rev.0xf1
EMMC NAME: VTU00M , S/N: 795237134
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_ 795237134_20140204_2048.extcsd
Sending Internal Reconfiguration Request...
Waiting configuration Apply!!!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!!!
Done.
Please don't forget to repair extCSD from backup!!!
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\VTU00M_ 795237134_20140204_2048.extcsd
Running:Repair extCSD...

Successfully connected to box on COM17
Box S/N:FULL_ERASE, ,FW Ver.: 01.48
Z3X EasyJtag Software ver. 1.0.105.0
Loading eMMC Addon Firmware...
CMD Pullup Level:1227 mV
CMD Active Level:1680 mV
EMMC CID 15010056545530304DF12F665B0E9FF1
EMMC CSD D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2012 FW rev.0xf1
EMMC NAME: VTU00M , S/N: 795237134
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing...
eMMC ACK Error !!!
eMMC ACK Error !!!
eMMC ACK Error !!!
eMMC ACK Error !!!
eMMC ACK Error !!!
Done!
Writing file...C:\Program Files\Z3X\EASYJTAG\Backups\EMMC_00000000_00080000. bin

Successfully connected to box on COM17
Box S/N: FULL_ERASE, ,FW Ver.: 01.48
Z3X EasyJtag Software ver. 1.0.105.0
Loading eMMC Addon Firmware...
CMD Pullup Level:1216 mV
CMD Active Level:1680 mV
EMMC CID 15010056545530304DF12F665B0E9FF1
EMMC CSD D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2012 FW rev.0xf1
EMMC NAME: VTU00M , S/N: 795237134
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000000080000 bytes to 00000000 ...ROM2
Write Speed: 222 kB/s
Done !!!