View Single Post
Old 03-24-2014, 06:31   #25 (permalink)
saeedullah_khan
Product Supporter
 
Join Date: Aug 2007
Location: karachi
Posts: 5,303
Member: 572216
Status: Offline
Sonork: 100.1612300
Thanks Meter: 3,738
LVTel L8 RDA 8851 4mb(test report)

READ INFO
Code:
Operation : Check Device / Info
======= Settings
Settings : Read AllInfo is On
Settings : Full Boot disabled by default

Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4006
CPU_CN : RDA Micro CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ... 
Sending LdrData ... 
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!

Checking step 1, wait  ... 
Checking step2, wait  ... 
Elapsed: 00:00:17
Done
Reconnect Power/Cable!
READ CODE
Code:
Operation : Read User Code
Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4006
CPU_CN : RDA Micro CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ... 
Sending LdrData ... 
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!

Read done, sorting EXTData
Following items found : 
Item : NVRAM
Required data found, extracting code

UserCode : 1234

Elapsed: 00:00:47
Done
Reconnect Power/Cable!
IMEI REPAIR
Code:
Operation : Factory Area Rebuild [Repair IMEI]

Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4006
CPU_CN : RDA Micro CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ... 
Sending LdrData ... 
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!

Read Factory Sector ... 
Read Ok , verify
Detected 2 Sim Slot(s)
Current Phone IMEI : 
IMEI1 : 352995052677239
IMEI2 : 352995052677247

New Phone IMEI : 
IMEI1 : 35001000000655-6
IMEI2 : 35002000009887-5

Build Factory Sector
Write Factory Sector
CSD WR : 81C05C48 , 81C05C5C
CSD DR : A2000000 , A2008000 , A2010000
CSD MB : 00008000
Verify Factory Sector
Sector Verifyed! IMEI Write Done!
Elapsed: 00:00:12
Reconnect Power/Cable!
READ FLASH
Code:
Chinese Miracle II  [RDA module] v 0.03

Operation : Read FullFlash
======= Settings
Settings : SafeMode is Off [Fast]
Settings : Make IFF (MCU) file
Settings : Make Calibration file

Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4006
CPU_CN : RDA Micro CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ... 
Sending LdrData ... 
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!

Read Flash now ... 
Read Ok, 4194304 bytes read
Verify file...
Target BbCpu : CT8851A
Target Flash : flsh_spi32m
Project Name : BV105
Project Info : 8851a_5169_qqvga_3216_L8
Compile Date : 20130518Sat1726
[BIN] Saved as : BV105_8851a_5169_qqvga_3216_L8_CT8851A_flsh_spi32m.bin
Make FlashFiles
FATNV Check passed
FSCSC Check passed
CALIB Check passed
[IFF] File saved to : C:\InfinityBox\CM2RDA\Flash\IFF\BV105_8851a_5169_qqvga_3216_L8_CT8851A_flsh_spi32m.iff
[CAL] File saved to : C:\InfinityBox\CM2RDA\Flash\IFF\BV105_8851a_5169_qqvga_3216_L8_CT8851A_flsh_spi32m.ifc
Build done
Done
Elapsed: 00:18:01
Reconnect Power/Cable!

WRITE FLASH

Code:
Load file...
BIN (MCU) : BV105_8851a_5169_qqvga_3216_L8_CT8851A_flsh_spi32m.bin
Target BbCpu : CT8851A
Target Flash : flsh_spi32m
Project Name : BV105
Project Info : 8851a_5169_qqvga_3216_L8
Compile Date : 20130518Sat1726
Load Ok

Operation : Flash
======= Settings
Settings : BIN : NVwrite Disabled
Settings : Factory Settings Enabled
======= Flash
Files set for flashing : 
[ MCU ] : BV105_8851a_5169_qqvga_3216_L8_CT8851A_flsh_spi32m.bin

Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4006
CPU_CN : RDA Micro CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ... 
Sending LdrData ... 
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!

======= Flashing MCU
Processing file : BV105_8851a_5169_qqvga_3216_L8_CT8851A_flsh_spi32m.bin
CSD WR : 81C05C48 , 81C05C5C
CSD DR : A2000000 , A2008000 , A2010000
CSD MB : 00008000
Flash Done

======= Setting Factory Defaults
Calculating new values...
NVMFAT Area : 0x003A0000 , Len : 0x0005C000
Format User Area ... 
CSD WR : 81C05C48 , 81C05C5C
CSD DR : A2000000 , A2008000 , A2010000
CSD MB : 00008000
Format Done
Elapsed: 00:03:53
Reconnect Power/Cable!
FORMAT

Code:
Operation : Format File System
Settings : SmartFormat is On

Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4006
CPU_CN : RDA Micro CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ... 
Sending LdrData ... 
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!

NVMFAT Area : 0x003A0000 , Len : 0x0005C000
Range as Factory Defined
Format User Area ... 
CSD WR : 81C05C48 , 81C05C5C
CSD DR : A2000000 , A2008000 , A2010000
CSD MB : 00008000
Format Done
Elapsed: 00:01:08
Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to saeedullah_khan For This Useful Post:
 
Page generated in 0.09735 seconds with 7 queries