Nokia Clone X2-02(Dead) Read Info
Code:
Chinese Miracle II [RDA module] v 0.04
Start at : [3/24/2014 / 10:38:58 AM]
Operation : Check Device / Info
======= Settings
Settings : Read AllInfo is Off
Settings : Full Boot disabled by default
Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
Current CPU is under test support!
Make 'FlashRead' before 'Format' or 'Flash Write' operations!
CPU_ID : 880A , rev : 7002
CPU_CN : CoolSand CT , RDA8853B
==== FLASH
FL_VEN : 25C2 , rev : 3700
FL_CNM : Macronix , MX25U64
FL_CAP : 00800000
==== Booting
Sending RamRun Loader...
Use : 880A_00800000.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!
Elapsed: 00:00:08
Format Fs Done Code:
Start at : [3/24/2014 / 10:40:21 AM]
Operation : Format File System
Settings : SmartFormat is On
Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
Current CPU is under test support!
Make 'FlashRead' before 'Format' or 'Flash Write' operations!
CPU_ID : 880A , rev : 7002
CPU_CN : CoolSand CT , RDA8853B
==== FLASH
FL_VEN : 25C2 , rev : 3700
FL_CNM : Macronix , MX25U64
FL_CAP : 00800000
==== Booting
Sending RamRun Loader...
Use : 880A_00800000.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!
NVMFAT Area : 0x00700000 , Len : 0x000FC000
Range as Factory Defined
Format User Area ...
CSD WR : 81C056FC , 81C05710
CSD DR : A0000000 , A0008000 , A0010000
CSD MB : 00008000
Format Done
Elapsed: 00:03:03
Reconnect Power/Cable!