GSM-Forum - View Single Post

mrfixit · 02-07-2005, 02:16

it probably got wet at the disbplay, open the display part and see the small 5 pin flat cable connector close to the top edge, remove the 5 pin flex cable there and clean contacts. if corroded need to solder fine wire to make contact. good luck.

02-07-2005, 02:16	#3 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	it probably got wet at the disbplay, open the display part and see the small 5 pin flat cable connector close to the top edge, remove the 5 pin flex cable there and clean contacts. if corroded need to solder fine wire to make contact. good luck.