View Single Post
Old 04-19-2014, 15:29   #52 (permalink)
sobaro
No Life Poster
 
Join Date: Nov 2007
Location: Arizona
Age: 38
Posts: 679
Member: 630795
Status: Offline
Thanks Meter: 177
Phone found!
Series 40 Device detected!
read info... - Ok

Core : v1.82 , BB5XG FlashEngine : v9.5

Selected FlashSettings : FullFlash
Files Set for Flashing :
MCU : rm961_02.700
PPM : rm961_02.70ic
CNT : rm961_nai02.70ic

Infineon flashing...
-> Infineon XG110 : IMEI Backup Created
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot Ok , 01AB
SBL : Dynamic
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH VEN : 00000020
FLASH DIE : 00008804
FLASH ID : UNKNOW [Not In Base]
Boot Done!

===Flashing [MCU]===
File : rm961_02.700
Image : hw_b1_rm961_02.700.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00000000 , Len : 0x00020000
Erasing, wait ...
Erase done
Write , Start : 0x00000000 , Len : 0x00006000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00800000 , Len : 0x00400000
Erasing, wait ...
Erase done
Write , Start : 0x00800000 , Len : 0x003F0000
Flashing , wait ...
Region flash done
Processing Region 3/3
Erase , Start : 0x00C5D000 , Len : 0x00203000
Erasing, wait ...
Erase done
Write , Start : 0x00C5D000 , Len : 0x0019E700
Flashing , wait ...
Region flash done
Check : FCAF
===Flashing [PPM]===
File : rm961_02.70ic
Image : hw_b1_rm961_02.70ic.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00100000 , Len : 0x00700000
Erasing, wait ...
Erase done
Write , Start : 0x00100000 , Len : 0x00571840
Flashing , wait ...
Region flash done
Check : 1B36
===Flashing [CNT]===
File : rm961_nai02.70ic
Image : hw_b1_rm961_nai02.70ic.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00E60000 , Len : 0x00100000
Erasing, wait ...
Erase done
Write , Start : 0x00E60000 , Len : 0x000FEE00
Flashing , wait ...
Region flash done
Check : 54CF

Flashing done, rebooting...
-> Infineon info : Do FullFactory Sets after flashing
Flashing Done!

MY PHONE STOPED WORKING SUDDENLY
i FLASHED IT SUCCESSFULY BUT IT WONT START . ITS KINDA DEAD OR WHAT ??
I TRIED SO MANY FLASHES
 
The Following User Says Thank You to sobaro For This Useful Post:
 
Page generated in 0.08338 seconds with 7 queries