View Single Post
Old 05-06-2014, 11:48   #45 (permalink)
titanic
Freak Poster
 
titanic's Avatar
 
Join Date: Apr 2004
Location: Mumbai, kuwait, UAE
Posts: 164
Member: 63065
Status: Offline
Sonork: 100.102547
Thanks Meter: 24
Excellent Speed

Quote:
Originally Posted by NoName® View Post
Hello , for 2x speed increase you may try use ver 1.3 from support or get here:

https://dl.dropboxusercontent.com/u/...e_v1.3.3.0.exe

We still testing improvements. Now write speed LITTLE INCREASED.
Z3X EasyJtag Software ver. 1.3.3.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 0606F80FA22B6D2F, ,FW Ver.: 01.50
Warning: CMD Pullup Level (1144 mV) too low , check cables etc.!!!
CMD Active Level:1536 mV
eMMC Device Information
EMMC CID : 15010056545530304DF1844034AA9F5A
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 2218800298
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_2218800298_20140402_1215.extcsd
Done.
Running:SAMSUNG: Smart Factory Reset + Format...
Z3X EasyJtag Software ver. 1.3.3.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1144 mV
CMD Active Level:1536 mV
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!!!
Done.
Please don't forget to repair extCSD from backup!!!
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\VTU00M_2218800298_20140 402_1215.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 1.3.3.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1144 mV
CMD Active Level:1536 mV
Writing...
Done!
Done.
Please don't forget to repair extCSD from backup!!!
Z3X EasyJtag Software ver. 1.3.3.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 0606F80FA22B6D2F, ,FW Ver.: 01.50
Warning: CMD Pullup Level (1134 mV) too low , check cables etc.!!!
CMD Active Level:1536 mV
eMMC Device Information
EMMC CID : 15010056545530304DF1844034AA9F5A
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 2218800298
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_2218800298_20140402_1217.extcsd
Done.
Writing file...D:\Phones\Easy Jtag\N7100\ROM2_GT-N7100_v2\EMMC_00000000_00200000.bin
Z3X EasyJtag Software ver. 1.3.3.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1134 mV
CMD Active Level:1536 mV
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 1723 kB/s
Done !!!


BR,
  Reply With Quote
The Following User Says Thank You to titanic For This Useful Post:
 
Page generated in 0.14948 seconds with 6 queries