View Single Post
Old 05-16-2014, 19:00   #49 (permalink)
Freak Poster
dj.orion's Avatar
Join Date: Aug 2006
Posts: 360
Member: 323742
Status: Offline
Thanks Meter: 73
Originally Posted by umerfarooq View Post
i notice that only s3 no:216 on EMMc and note2 no:219 and some time no:234 are working perfect for repairing dead boot and specially for product code at this moment i have no logs available but as soon available i post here. i almost done 30 mobiles S3 and 10 note2 mention above no on emmc.others not detected. i think this information help EASY JTAG team for improvement their software in next updates
Can U explain more..
What meaning n where is no:216, 219 n 234, phisically seen or via log.?

I get N7100 dead for several times n facing can't do write to eMMC
But can do read n formating
eMMC became read only memory ...
Look at Ur log n mine, had same error in writing process

Is this positive eMMC totaly can't repaired.?

Successfully connected to box on COM69
Box S/N: XXXXXX, ,FW Ver.: 01.48
Z3X EasyJtag Software ver.
Loading eMMC Addon Firmware...
CMD Pullup Level:1639 mV
CMD Active Level:2310 mV
EMMC CID 15010056545530304DF104260B109F0B
EMMC CSD D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2012 FW rev.0xf1
EMMC NAME: VTU00M , S/N: 69602064
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000000200000 bytes to 00000000 ...ROM3
Retry writing adress 0x00000000
Retry writing adress 0x00000000
Retry writing adress 0x00000000
Retry writing adress 0x00000000
Writing eMMC flash page stopped by user request
  Reply With Quote
Page generated in 0.13883 seconds with 6 queries