View Single Post
Old 05-28-2014, 15:55   #1 (permalink)
rikimaer
Freak Poster
 
Join Date: May 2004
Location: spain
Age: 35
Posts: 141
Member: 65061
Status: Offline
Thanks Meter: 30
i8730 support PLEASE

Get connected as i9505 but wich file and how i should write on the emmc?

Thanks
Best Regards


Warning , you are using custom pinout config make shure that NRST and GND on proper places!
EasyJtag Suite ver.: 1.5.1.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7600).

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. - The best eMMC and JTAG service solution. Total repair and forensics tool for Android devices!
Check security...OK
Initialising: SAMSUNG GT-I9505 Config ver.:1.01
I/O Level set to : 2200 mV
Box S/N: 10100416241CBA99 ,FW Ver.: 01.50
Connecting to Target...
Halting CPU...
Initialize hardware...
Starting target communication...
KNOX WARRANTY VOID: 0
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
Reading dump to file...C:\Users\Jose\Desktop\SAMSUNG_GT-I9505_0x00000000_0x00200000.bin
Reading 0x000000200000 bytes from emmc adress 0x000000000000
Dumped 2097152 bytes in 9.065518s (225.911 KiB/s) OK.
  Reply With Quote
 
Page generated in 0.06805 seconds with 7 queries