Quote:
Originally Posted by walidjamil  help me pliz,i am trying to repair emmc 000000 but i cant cuz its saying *Reconnect eMMC power lines and press 'VTU00M Repair' again* i am reconecting but the same thing and i cant read with *read smart report*
EasyJtag Suite ver.: 1.5.2.1 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7600), 64-bit edition.
Successefuly connected to box on COM28
Box S/N: 1313031079C084EF, ,FW Ver.: 01.50
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : AAEC-9CD5 , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED , ACTIVATE NOW
Z3X Card Activation [SAMS] : NOT ACTIVATED , ACTIVATE NOW
Z3X Card Activation [JTAG] : ACTIVATED
Z3X EasyJtag Software ver. 1.5.2.1
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1313031079C084EF, ,FW Ver.: 01.50
CMD Pullup Level:1237 mV
CMD Active Level:1619 mV
eMMC Device Information
EMMC CID : 1501003030303030300C201301281062
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 01/2013 Rev.0xc
EMMC NAME: 000000 , S/N: 538116392
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x14 , width 1bit , Partition config [179]: 0x38.
Backup saved: 000000_ 538116392_20140501_2008.extcsd
Done.
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
Z3X EasyJtag Software ver. 1.5.2.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1237 mV
CMD Active Level:1619 mV
Repair VTU00M eMMC:
Entering repair mode 1...
Success
Erasing repair area...
Success
Writing repair area...
Success
Exit repair mode 1...
Success
===================================
NOTE: This stage was reapir only eMMC NAME , not wear leveling data!!
NOTE: Repair Stage 2 must be done to make eMMC repair completely!
Please, Reconnect eMMC power lines and press 'VTU00M Repair' again
===================================
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
Z3X EasyJtag Software ver. 1.5.2.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1237 mV
CMD Active Level:1619 mV
Repair VTU00M eMMC:
Entering repair mode 1...
Success
Erasing repair area...
Success
Writing repair area...
Success
Exit repair mode 1...
Success
===================================
NOTE: This stage was reapir only eMMC NAME , not wear leveling data!!
NOTE: Repair Stage 2 must be done to make eMMC repair completely!
Please, Reconnect eMMC power lines and press 'VTU00M Repair' again
=================================== |
NOTE: This stage was reapir only eMMC NAME , not wear leveling data!!
NOTE: Repair Stage 2 must be done to make eMMC repair completely!
Please, Reconnect eMMC power lines and press 'VTU00M Repair' again