[Dipendra Pathak]

How do I confirm that Formatting SPD the Device is safe using GPG EMMC BOX (Box won’t kill the SPD Devices)?




Take the info of android Devices. If you see “Analysis flash internal data successfully.” In the GPG EMMC log or Screen short, then, you can format the device without any problem and GPG EMMC box won’t kill your Android Devices. Check the log :

1. Boot downloaded.2. CPU TYPE:SC8810/6820 [88100040]3. Flash ID: 002C00BC905556004. Flash Type:[Micron] MT29C4G48MAZAPAKD5. FLASH LEN:0x200000006. mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),4m(modem),3840k(fixnv),3840k(backupfixnv),512 0k(dsp),3840k(runtimenv),10m(boot),10m(recovery),2 30m(system),156m(userdata),60m(cache),256k(misc),1 m(boot_logo),1m(fastboot_logo),3840k(productinfo), 512k(kpanic),512k(simlock),10m(intmemory)7. Analysis flash internal data successfully.

After you see, “Analysis flash internal data successfully”, you can format the device from the GPG EMMC Android Main Interface or from this “USB MODE” Tab.