GSM-Forum - View Single Post - GPG EMMC Chinese Andorid (MTK, SPD), Original Android Tool Detail Manual ;)

**Dipendra Pathak** · 07-08-2014, 16:08

How to Auto Format Android Devices (with USB Cable + Battery)?

You can do the Auto format of the device using following manual:

1. Open the GPG EMMC software
2. Click on “Android” Tab
3. Click one “USB Mode” Sub-Tab
4. Tick on “Format” and choose “Auto” Format from Drop Down list.

Note:
In “Auto Format” you don’t need to describe Format Address and length of the device Flash File But, in custom format, you must describe the format address and length information from the “Read Info” at the time of format. Also, you can find the safe format information of SPD Android from the “Read info” button. If you see – “Analysis flash internal data successfully.”, then, you can format the device with your closed eyes

5. Choose the CPU Type “MTK or SPD6820” from drop-down list.
6. Be sure to tick on “USB Mode”
7. Click on “Start”
8. Power off the Device
9. Take Out the Battery from the Device.
10. Insert the Battery to the Device again.
11. Press “Boot Key” if necessary (Boot Key might be Vol- / Vol+ / Vol- and Home, Vol- and Home etc.)
12. Hold and press Boot Key and insert the USB cable to the Device.
13. Let the device install the driver itself.
14. Wait until you see the information “File Erasing Complete”

free upload image

15. Done.

07-08-2014, 16:08	#6 (permalink)
Dipendra Pathak Product Manager Join Date: Apr 2008 Location: Whitehole throught Blackhole! Posts: 9,582 Member: 747989 Status: Offline Sonork: 100.1593052 Thanks Meter: 8,621	How to Auto Format Android Devices (with USB Cable + Battery)? You can do the Auto format of the device using following manual: 1. Open the GPG EMMC software 2. Click on “Android” Tab 3. Click one “USB Mode” Sub-Tab 4. Tick on “Format” and choose “Auto” Format from Drop Down list. Note: In “Auto Format” you don’t need to describe Format Address and length of the device Flash File But, in custom format, you must describe the format address and length information from the “Read Info” at the time of format. Also, you can find the safe format information of SPD Android from the “Read info” button. If you see – “Analysis flash internal data successfully.”, then, you can format the device with your closed eyes 5. Choose the CPU Type “MTK or SPD6820” from drop-down list. 6. Be sure to tick on “USB Mode” 7. Click on “Start” 8. Power off the Device 9. Take Out the Battery from the Device. 10. Insert the Battery to the Device again. 11. Press “Boot Key” if necessary (Boot Key might be Vol- / Vol+ / Vol- and Home, Vol- and Home etc.) 12. Hold and press Boot Key and insert the USB cable to the Device. 13. Let the device install the driver itself. 14. Wait until you see the information “File Erasing Complete” free upload image 15. Done.