S4
SC8810 NAND_ST04GR4B
[World First its Flash]
Read Full:
Code:
-------------------Created: 01.08.2014 14:21:59-------------------
Chip=SpreadTrum
Action=ReadFlash
FlashType=Nand
boot=8810
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=USB
FlashFile=D:\ремонт\прога\Китайские телефоны\Spreadtrum\Spreadtrum_Android\S4_ CPU_8810_ Flash_NAND_ST04GR4B
Comport=COM4
Baudrate=921600
CPU_Type=88100001
CPU_ID=88100001
NOR_ID=
NOR_Size=
NOR_Name=
NOR_DieCnt=
NAND_ID=002000BCFFFFFFFF
NAND_Size=512MB
NAND_Name=NAND_ST04GR4B
Initializing...
DA_LIB_VER_5.9.0.0
You must install the correct USB drivers before any actions...
You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports...
Auto reset and search the USB-to-Serial...
Connecting...
Spd USB-to-Serial=COM6
Connected...sending boot...
Boot1 is Done.
Wait for ACK...
Done.
Change baud to 921600
Sending Boot2...
Boot2 is Done.
Wait for ACK...
Done.
ArmBootMode: 8810000100005A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: 88100001 Flash: NAND_ST04GR4B
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
Save as: D:\ремонт\прога\Китайские телефоны\Spreadtrum\Spreadtrum_Android\S4_ CPU_8810_ Flash_NAND_ST04GR4B.cmz
All Done.
+++++++++++++++++++End at: 01.08.2014 15:07:07+++++++++++++++++++