i9505 resurrect issue hello, got a i9505 on my sat conected to box but wont´t resurrect, y click target reset&go and after that analyze jtag chain and come this:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I9505 V1.0.5194.48172]
Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x4BA00477, IR Length = 0x04 bits
Device on TAP #1: ID = 0x2071B0E1, IR Length = 0x0B bits
Total IR length: 0x000F bits
Analizing IDCODE(s) of the JTAG scan chain:
1. 0x4BA00477: Generic CORTEX-A9/A15 Core Based Target
2. 0x2071B0E1: Qualcomm APQ8064T, H/W Rev. #2
no possible to go further, any ideas?
also mention that power button was pressed on resurretc process.
br. |