View Single Post
Old 08-24-2014, 17:45   #1 (permalink)
riajul1988
No Life Poster
 
riajul1988's Avatar
 
Join Date: Feb 2011
Location: (BaNgLaDeSh).(U.A.E,AD)
Posts: 1,931
Member: 1511441
Status: Offline
Sonork: 100.1604057
Thanks Meter: 1,157
i8190 (512mb_OK_locked bin file write error)

EasyJtag Suite ver.: 1.6.1.1 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).

For support and updates visit http://easy-jtag.com
Check security...OK
Initialising: SAMSUNG GT-I8190 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 0404111A58FD0E5F ,FW Ver.: 01.50
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
You must select flash file first!
Checking NAND Image : I:\all setup\Easy-Jtag\i8190\512mb_OK_locked.bin
File successefuly loaded!
Writing memory from file...I:\all setup\Easy-Jtag\i8190\512mb_OK_locked.bin
Timeout Error while reading approx : 0x00000100 bytes over DCC
Unknown DCC answer /PROTOCOL/
Failed writing file I:/all setup/Easy-Jtag/i8190/512mb_OK_locked.bin to eMMC flash 0 at offset 0x1FB70000
Done with error(s)...


  Reply With Quote
 
Page generated in 0.13995 seconds with 6 queries