thread: Lava 355 error
View Single Post
Old 10-22-2014, 15:55   #3 (permalink)
amancommunicati
No Life Poster
 
Join Date: Feb 2008
Location: budaun
Age: 34
Posts: 926
Member: 702572
Status: Offline
Sonork: 9837200009
Thanks Meter: 73
Card found: S/N 085E:0128
Chinese Miracle II [MTK module] v 1.04

Operation : Check / Read Info [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 42 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Initial info read Ok!

Done!
Elapsed: 00:00:06
Reconnect Power/Cable!


Operation : Read Flash [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 42 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...
NAND settings not exists, will check now ...
Settings read Ok!
- > Re-connect battery and start operation again!


Done!
Elapsed: 00:00:13
Reconnect Power/Cable!


Operation : Read Flash [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x00000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...
USBDL : Error init HSUSB!!!

Operation Failed
Elapsed: 00:00:24
Reconnect Power/Cable!


Operation : Read Flash [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 55 ]
Sync...
Brom Init not done
Boot Error!

Operation Failed
Elapsed: 00:00:05
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 42 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Format : Cache and UserData (Full Factory Reset)

Format CACHE block
Format block Ok!
Format UDA block
Set HW_STORAGE failed! Something wrong with HW?

Operation Failed
Elapsed: 00:00:19
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to amancommunicati For This Useful Post:
 
Page generated in 0.16079 seconds with 6 queries