also got the same problem first easy repair boot was flashed but white screen then try again this is the error tried on 2 corby 2 same problem...
Check security...OK
Initialising: SAMSUNG GT-S3850 Config ver.:1.01
I/O Level set to : 3000 mV
Box S/N: xxxxxxxxxx ,FW Ver.: 01.50
Connecting to Target...
JTAG device: BCM2133
CPU IDCODE : 0x07926F0F Mfg.: 0x787, Part: 0x7926, Ver.: 0x0
CPU Manufacturer: Samsung , CPU Name: BCM21331
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0040 'NAND 256MB 1.8V 8-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:2048 bytes , Block size:64 pages
NAND Writing BOOT...
Failed writing file BOOT.BIN to NAND flash 0 at offset 0x00000000 code# 209
cannot erase also... |