Quote:
Originally Posted by yamay any suggestion or idea?..
thank you in advance.. |
Remove your mobiles battery and check "Made in" Then Open This Link
Samsung I9082 / I9082L Galaxy Grand DUOS Firmwares
Download the desired Firmware
And Follow the instructions 100% Tested
Download and extract Odin file, you will find Odin3 v3.07.exe and some other files.
Download and extract any one of the ROM from the link provided at the top of the post. You will find a .tar/.tar.md5 file. Launch Odin3 v3.07.exe as Administrator.
Make sure that only Auto Reboot and F. Reset Time check-boxes are checked. Re-partition should be unchecked.
Download and extract any one of the ROM from the link at the end of the post. You might find single/multiple .tar or .tar.md5 files. Run Odin as Administrator.
Single .tar/.tar.md5 file
Check One Package, Auto Reboot and Protect OPS check boxes in options.
Click on One Package button and browse the single .tar/.tar.md5 file.
Check Auto Reboot and Protect OPS check boxes only. Make sure that One Package checkbox is unchecked.
Click on BOOT button and Select .tar/.tar.md5 file with APBOOT in the name, ignore if not present.
Click on PDA button and Select .tar/.tar.md5 file with CODE / PDA in the name.
Click on PHONE button and Select .tar/.tar.md5 file with MODEM in the name, ignore if not present.
Click on CSC button and Select .tar/.tar.md5 file with CSC / CSC-MULTI in the name, ignore if not present.
Leave EFS blank.
Power off and reboot your device into Downloading Mode by pressing and holding Volume down + Home + Power button until you see a construction Android icon with a warning triangle. Then press Volume up button to enter into downloading mode.
Plug-in your device into PC using USB cable. If Odin detects your device, the ID:COM box will turn light blue and the Message Box will show Added!! message. If not, then try re-installing Samsung USB drivers or plugging your device into a different USB port.
Once every step mentioned above is successfully completed, press Start button to begin flashing procedure. Flashing process take some time so have patience. DON’T INTERRUPT FLASHING PROCEDURE ANYHOW OTHERWISE YOUR DEVICE MAY BE HARD BRICKED.
Once flashing process is successfully completed, Odin will show PASS! with green background. Then your device will reboot. First reboot is always longest so be patient.
Done !! Your device is successfully unbricked now.
Note:-
If your device suffers bootloop after flashing your device. Then boot your device into Recovery Mode by pressing and holding Home + Power button until you see Recovery Menu. Then select wipe data/partition to clear previous caches and reboot. It should boot successfully now.