[Gsmserver]

Octoplus JTAG Software v.1.8.1 is out!

We have added boot repair via USB and small TP for LG F310L and LG L-04E.
Also added Boot/Device Repair for Samsung GT-I9210T and HTC Desire (PB99210) via JTAG.

Octoplus Box JTAG Software v.1.8.1 Release Notes

• Added support for the following models:

- LG F310L - added Dead Boot Repair via USB
- LG L-04E - added Dead Boot Repair via USB
- Samsung GT-I9210T - added Dead Boot/Device Repair
- HTC Desire (PB99210) - added Dead Boot/Device Repair, Repair IMEI, Repair CID, Unlock (via Read Codes) (thanks to mr. mathew_di)

• Improved connect procedure for Dead Boot Repair via USB for the following devices:

- LG P710
- LG P712
- LG P713, P713GO, P713TR
- LG P714
- LG P715
- LG P716

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair F310L and LG L-04E via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.1

Find out more at: www.octoplusbox.com