GSM-Forum - View Single Post - T230 Reflashing with UFS-3

gama_cell99 · 03-31-2005, 23:56

Dear All........

I have T230 first problem is auto restart and I try reflashing phone using UFS-3

1.I Connect the cable to phone without battery,Press GO,Put battery to phone, phone boots.
2.I Choose Mcu flash(t230_R2A007_1122641_AsianLatin1_Mcu.bis)and press Flash Mcu.
3.After flashing done I Choose Gdfs(t230_gdfs.big) and press Flash Gdfs
4.After Gdfs flashing Done I press Init Locks
5.I press Init SecBlk and press OK to correct imei
After All Done UFS said (Please Disconnect Cable from Mobile and Power it On) I press OK remove cable,remove battery and put again the battery to phone but when pressing power on phone dead can't power on.

Please Help me...........

03-31-2005, 23:56	#1 (permalink)
gama_cell99 Freak Poster Join Date: Nov 2004 Age: 44 Posts: 305 Member: 92067 Status: Offline Thanks Meter: 10	T230 Reflashing with UFS-3 Dear All........ I have T230 first problem is auto restart and I try reflashing phone using UFS-3 1.I Connect the cable to phone without battery,Press GO,Put battery to phone, phone boots. 2.I Choose Mcu flash(t230_R2A007_1122641_AsianLatin1_Mcu.bis)and press Flash Mcu. 3.After flashing done I Choose Gdfs(t230_gdfs.big) and press Flash Gdfs 4.After Gdfs flashing Done I press Init Locks 5.I press Init SecBlk and press OK to correct imei After All Done UFS said (Please Disconnect Cable from Mobile and Power it On) I press OK remove cable,remove battery and put again the battery to phone but when pressing power on phone dead can't power on. Please Help me...........