Please support this type of EMMC:
Code:
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0606171217xxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:2691 mV
CMD Active Level:2763 mV
Can't init device, Reason: OCR Ready Timeout Error [EMMC DEAD]
Done.
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0606171217xxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:2681 mV
CMD Active Level:2732 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C
EMMC CSD : 902701320F5903FFF6DBFFEF8A404022
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC NAME (HEX): 30303030303000
EMMC ROM1 (Main User Data) Capacity: 4095 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20150303_1714.extcsd
Searching for partition tables...
Read Pages Failed, Reason: CMD Timeout Error
Partitioning not detected...
Done.
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0606171217xxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:2072 mV
CMD Active Level:2155 mV
eMMC Device Information
EMMC CID : 15010053355530304D0203438A74C0F0
EMMC CSD : D02701320F5903FFF6DBFFE18E404028
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2013 Rev.0x2
EMMC NAME: S5U00M , S/N: 54758004
EMMC NAME (HEX): 53355530304D00
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: S5U00M_ 54758004_20150303_1729.extcsd
Done.
Running:SAMSUNG: eMMC firmware update...
EMMC NAME: S5U00M
This eMMC is not supported yet!
To force eMMC Firmware Update:
* Press and keep 'Shift' key
* Start 'SAMSUNG: eMMC Firmware Update'
* Type and press 'Confirm' eMMC Part Number
eMMC can be fully damaged, if type non-original Part Number!