[kuli]

i9100 emmc type KMVYL000LM
vccq is 3,3 v and vcc 1,8? this is correct?


Z3X EasyJtag Software ver. 1.9.1.3
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 07FF**************8, ,FW Ver.: 01.52
CMD Pullup Level:2114 mV
CMD Active Level:2980 mV
eMMC Device Information
EMMC CID : 1501003030303030302520110416B070
EMMC CSD : D02701320F5903FFF6DBFFEF8A404066
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 11/2013 Rev.0x25
EMMC NAME: 000000 , S/N: 537986070
EMMC NAME (HEX): 30303030303000
Can't init EMMC, Reason: CARD Data FIFO Timeout Error
Check Data Line!
Done.
i remove emmc and i get this error
any advice is welcome
thx

i solve problem... i set emmc voltage to 1,8 volt