hi
i got g730 u10 dead
i found pinouts and connection is ok
but emmc is sandisk and i dont have boot files dump
now my question is can i make dump from official flash file??? or flash file via emmc??? like samsung tar/md5
Code:
Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
CID : 45010053454D30344728059CF08B315B
CSD : D00F00320F5903FFFFFFFDFF8A4040A7
eMMC Boot Information
Revision 1.6 (for MMC v4.5, v4.51)
BOOT PARTITION : BOOT PARTITION 1
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 4096 KB
HC ERASE GROUP SIZE: 2048 KB
USER AREA SIZE : 3959422976 BYTES
BOOT PARTITION SIZE: 2048 KB
RPMB PARTITION SIZE: 2048 KB
eMMC Device Information
Manufacturer ID: SANDISK
Device Type : Embedded BGA
Application ID : 00
Product Name : SEM04G
Product Rev : 2.8
Product SN : 059CF08B
Manufactured : January 1998
Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 3 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO