Quote:
Originally Posted by blang  EasyJTAG Magic SD Card Tool Operation Manual
Here are the instruction on creating recovery sd-card and boot sd-card to recover bricked Samsung Phones in case your phone got broken.*Before doing this, if your device are detected by usb as Qualcomm HS-USB QDLoader 9008 ( If you device are EXYNOS MCU Based it not need to be detected by USB at all)
Creating MAGIC CARD from ZBIN Image.
1. Download both PIT and ZBIN files for yor phone from support area.
2. Insert clean formatted SD Card in USB SD Card Reader
3. Run EasyJTAG Software and select SD Image Plugin
4. Select ZBIN file for creating recovery card by clicking button
5. Select yur SD card in drives list. And click button.
6. After few seconds magic SD card will be done. Close plugin and remove it from reader
Recovery Phone by SD Unbrick card
1. Insert SD Card in phone SD card slot and attach battery
2. Put phone in Download mode by USB-JIC either by keyboard combination ( make sure that you have used file with newer firmware than current phone firmware. If you don't know what firmware have ben in phone before software damage – just use latest zbin file from support!)
3. If phone go in ODIN mode, download firmware with same version as in ZBIN file e.g if you used
4. Samsung_GT-I9200_I9200XXUDNE4_GPT_UEFI.zbin you should use I9200XXUDNE4 firmware or newer one.
5. Flash phone with ODIN with PIT file!
6. Repair Done;
Creating MAGIC CARD from BIN Dump
If your phone have more actual firmware version than ZBIN file on support or you have unsupported phone – you can make ZBIN file by yourself from BINary dump ( eMMC Direct Dump or ADB Full Dump)
1. Run EasyJTAG Software and select SD Image Plugin
2. Select (128mbt DUMP)BIN* file for creating recovery card by clicking button
3. Click [Convert From BIN] button
4. After operation complete you will get ZBIN and PIT file in source folder.
• Different Platforms requires different ROM parts for Magic SD |
Code:
SAMSUNG GALAXY NOTE 2 N7100 16GB ( INDIAN MODEL )
history :
=====
last STOCK VERSION: "N7100XXFUN1_N7100ODDFNI1_INU"
After use custom ROM then unfortunately boot looping ..
then after client again flash N7100XXFUN1_N7100ODDFNI1_INU
stock file .. this time stuck in flashing process..
then after never boot and no sign of life..
we use your process for unbrick ..through SD CARD METHOD...
using ""Samsung_GT-N7100_N7100XXUENA1_SBOOT_4.3_V2.zbin"" this file
working in phone.
after that, when i am flash through odin using "Samsung_GT-N7100_16G.pit" file
with "N7100XXUFNL1_N7100ODDFNI1_INU"
but not flash just stuck in ""PIT FOR MAPPING""
i am also try 4.3 ROM 4.1 ROM but same error..
plz guide how solve this problem ... ?
