View Single Post
Old 06-04-2015, 14:04   #1 (permalink)
maanarman
No Life Poster
 
maanarman's Avatar
 
Join Date: Jan 2008
Location: PAKISTAN KARACHI
Age: 44
Posts: 12,919
Member: 686395
Status: Offline
Sonork: 100.1608345
Thanks Meter: 3,822
Rivo Advance A210 read user password error or bugs

read flash

Code:
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 182 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : E3FA55535619592B8559D540FFAE5364
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DC , [MX] MX25U6435E
[0] : FLASH_DIE : 00C2 0025 0037 0000 
[0] : FLASH_LEN : 0x00800000
SDS : 0x007FE000 , 0x00002000
Reading Flash Conent now ... 

Read Flash now
Read Ok , 8388608 bytes read
Check and collect compile info
File_Info   : FARSIGHTED61A_12832_11C_PCB01_gprs_MT6261_S00.6261A_X400_C03_A210_64X32_SL_240X320_QVGA_V09.bin
FileVersion : 6261A_X400_C03_A210_64X32_SL_240X320_QVGA_V09
Saved to : C:\InfinityBox\CM2MTK\Read_out\FARSIGHTED61A_12832_11C_PCB01_gprs_MT6261_S00.6261A_X400_C03_A210_64X32_SL_240X320_QVGA_V09.bin

Done!
Elapsed: 00:00:30
Reconnect Power/Cable!
unlock

Code:
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 182 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : E3FA55535619592B8559D540FFAE5364
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DC , [MX] MX25U6435E
[0] : FLASH_DIE : 00C2 0025 0037 0000 
[0] : FLASH_LEN : 0x00800000
SDS : 0x007FE000 , 0x00002000

Read ExtData
Sorting ExtData
Reading UserCode

UserCode not found or not set! If UserCode exist - send dump to support

PLock|MobTrack : Not active or LID not exists

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!
password not show
  Reply With Quote
 
Page generated in 0.08972 seconds with 7 queries