blu zoey no service after wrong flash i have blu zoey t166 that i flashed by mistake with BLU_T176_V21_GENERIC_20130902_1820. i now flash it correct fileBLU_T166_V15_GENERIC_131217
but phone says no service.
i Flash,format,repair imei, but still No Service.
is there a nvram file i can write to repair phone?
i also read flash from phone from same network and write to phone but still no service.
how can i fix this?
Start at : [6/22/2015 / 3:55:39 PM]
Operation : Flash [ v1.21 ]
======= Flash
Files set for flashing :
[ MCU ] : HEXING60D_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_0 8_MP_V1_F11.bin
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 20 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : 0000
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 971697E4CBAFE494164CA21A68AA47E5
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : EF00 4000 1600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00300000
SDS : 0x00000000 , 0x00000000
File_Info : HEXING60D_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_0 8_MP_V1_F11.bin
FileVersion : MAUI.11B.W13.08.MP.V1.F11
Flash now
Erase region , wait ...
Write data , wait ...
Write : HEXING60D_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_0 8_MP_V1_F11.bin
Done!
Elapsed: 00:00:35
Reconnect Power/Cable!
Last edited by gorgans; 06-22-2015 at 22:32.
|