09-07-2015, 06:00
|
#5 (permalink)
|
No Life Poster
Join Date: Oct 2005 Location: iSiddeque Age: 41
Posts: 2,009
Member: 188260
Status: Offline
Sonork: 100.1590438 Thanks Meter: 428 | Quote:
Originally Posted by JayDi | Alcatel ONE TOCH 4007x pixi locked counter blocked with Orange in hand.
Read full flash some error file conversation etc please see logs. Quote:
Operation : Read Flash [ v1.29 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 53 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0084 , [SAMSUNG] KA100O015E_BJTT/KF94G16Q4V
[NAND] : FLASH_DIE : 00EC 00BC 0000 0066 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Conent now ...
NAND settings not exists, will check now ...
Settings read Ok!
- > Re-connect battery and start operation again!
Done!
Elapsed: 00:00:19
Reconnect Power/Cable!
Operation : Read Flash [ v1.29 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 53 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0084 , [SAMSUNG] KA100O015E_BJTT/KF94G16Q4V
[NAND] : FLASH_DIE : 00EC 00BC 0000 0066 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Conent now ...
Read Ok , collect info
Brand : TCT
ProdName : Pixo
ProdModel : ONE TOUCH 4007X
Device : Pixo_GSM
AndroidVer: 2.3.6
MTKxCPU : MT6575
MTKxPRJ : ALPS.GB2.MP.V2.24
File conversion error, file already exists! Saved as default!
Done!
Elapsed: 00:04:17
Reconnect Power/Cable!
Load File
Bad file detected! | |
| |