Code:
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 60 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : 04DA6CC48F203353DE6C5D845239179C
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : EF00 4000 1600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00300000
INT_RAM : 0x0000D400
EXT_RAM : 0x00400000
SDS_INFO : Not exists
Reading Flash Conent now ...
Read Flash now
Read Ok , 3145728 bytes read
Check and collect compile info
File_Info : KEYTAK50M_11B_PCB01_gsm_MT6250_S00.MAUI_11B_W11_32_SP_V8.bin
FileVersion : MAUI.11B.W11.32.SP.V8
Error while making FW! Make FlashRead as dump and send to support!
Done!
Elapsed: 00:00:12
Reconnect Power/Cable!
Operation : Read Flash [ v1.31 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 60 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : 00000000000000000000000000000000
BROM Protocol Version : 05
Setting...
Setting done , result code 0x0000
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : EF00 4000 1600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00300000
INT_RAM : 0x0000D400
EXT_RAM : 0x00400000
SDS_INFO : Not exists
Reading Flash Conent now ...
Read Flash now
Read Ok , 3145728 bytes read
Check and collect compile info
File_Info : KEYTAK50M_11B_PCB01_gsm_MT6250_S00.MAUI_11B_W11_32_SP_V8.bin
FileVersion : MAUI.11B.W11.32.SP.V8
Error while making FW! Make FlashRead as dump and send to support!
Done!
Elapsed: 00:00:20
Reconnect Power/Cable!
dump link