10-03-2015, 09:08
|
#2 (permalink)
|
No Life Poster
Join Date: Aug 2006 Location: proud to be an INDIAN Muslim Age: 39
Posts: 5,175
Member: 333199
Status: Offline
Sonork: may i help u just pm me Thanks Meter: 2,405 | Quote:
Originally Posted by Abid Hussain Today I Try To Read Factory Firmware From (QMobile X35) Got This Error.
File conversion error, file already exists! Saved as default!
Here Is Log Code: Operation : Check / Read Info [ v1.32 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 214 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D3034473A039AB736123B
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : G40ME
[eMMC] : FLASH_CID : 45010053454D3034473A039AB736123B
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
[AP] : Initial info read Ok!
Brand : QMobile
ProdName : QMobile X35
ProdModel : QMobile X35
Device : QMobile
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : QMobileX35_MP_UNLOCK_19_03_2015
Done!
Elapsed: 00:00:10
Reconnect Power/Cable!
Operation : Read Flash [ v1.32 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 214 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D3034473A039AB736123B
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : G40ME
[eMMC] : FLASH_CID : 45010053454D3034473A039AB736123B
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Conent now ...
Brand : QMobile
ProdName : QMobile X35
ProdModel : QMobile X35
Device : QMobile
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : QMobileX35_MP_UNLOCK_19_03_2015
[Read Ok] : preloader_ztenj72_we_72_m536_kk.b
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Error] : Bad FAT/SD data
Looks like unusable file , break!
Read Ok , collect info
Brand : QMobile
ProdName : QMobile X35
ProdModel : QMobile X35
Device : QMobile
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : QMobileX35_MP_UNLOCK_19_03_2015
File conversion error, file already exists! Saved as default!
Done!
Elapsed: 00:04:04
Reconnect Power/Cable! | most probabbly sytem part of mobile damaged from other lovely chinese tools |
| |