GSM-Forum - View Single Post - Phone not support on this boot, or cpu dead

habib.habib88 · 11-23-2015, 02:10

Welcome to use McnBox!
Initialize in progress...
Box didn't found, Please reconnect!
Error! Box will not work
Welcome to use McnBox!
Initialize in progress...
Box didn't found, Please reconnect!
Possible : Driver not installed
Error! Box will not work
Welcome to use McnBox!
Initialize in progress...
Box didn't found, Please reconnect!
Possible : Driver not installed
Error! Box will not work
Welcome to use McnBox!
Selected COM32
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2010xxxxxxxxx
Firmware V1.15
Checksum 9B23-BBBE
Software V3.59
Box Connected!
Ready working at COM32
Waiting for USB Port...
MTK Serial Port: COM10
Press and Holding Power button now !
Connecting, wait...
Connected to Phone.
CPU: MT6260 Ver: CB00 SW:0000
Initialize Boot7 ...
Phone not support on this boot, or cpu dead
Waiting for USB Port...
MTK Serial Port: COM10
Press and Holding Power button now !
Connecting, wait...
Connected to Phone.
CPU: MT6260 Ver: CB00 SW:0000
Initialize Boot7 ...
Phone not support on this boot, or cpu dead
Waiting for USB Port...
User Abort
Waiting for USB Port...
User Abort
Error usbport
Waiting for USB Port...
MTK Serial Port: COM10
Press and Holding Power button now !
Connecting, wait...
Connected to Phone.
CPU: MT6260 Ver: CB00 SW:0000
Initialize Boot7 ...
Phone not support on this bWelcome to use McnBox!
Selected COM32
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial NWelcome to use McnBox!
Selected COM32
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2010xxxxxxxxx
Firmware V1.15
Checksum 9B23-BBBE
Software V3.59
Box Connected!
Ready working at COM32
Press and Holding Power button now !
Connecting, wait...
User Abort
Waiting for USB Port...
MTK Serial Port: COM10
Press and Holding Power button now !
Connecting, wait...
Connected to Phone.
CPU: MT6260 Ver: CB00 SW:0000
Initialize Boot7 ...
Phone not support on this boot, or cpu dead
Waiting for USB Port...
MTK Serial Port: COM10
Open Port Error:
*** Port was occupied.
Waiting for USB Port...
MTK Serial Port: COM10
Press and Holding Power button now !
Connecting, wait...
Connected to Phone.
CPU:

11-23-2015, 02:10	#1 (permalink)
habib.habib88 Freak Poster Join Date: Dec 2007 Posts: 125 Member: 642767 Status: Offline Thanks Meter: 27	Phone not support on this boot, or cpu dead Welcome to use McnBox! Initialize in progress... Box didn't found, Please reconnect! Error! Box will not work Welcome to use McnBox! Initialize in progress... Box didn't found, Please reconnect! Possible : Driver not installed Error! Box will not work Welcome to use McnBox! Initialize in progress... Box didn't found, Please reconnect! Possible : Driver not installed Error! Box will not work Welcome to use McnBox! Selected COM32 Baud setting ... Set Baud done Initialize in progress ... Checking data ... Serial No. MCN2010xxxxxxxxx Firmware V1.15 Checksum 9B23-BBBE Software V3.59 Box Connected! Ready working at COM32 Waiting for USB Port... MTK Serial Port: COM10 Press and Holding Power button now ! Connecting, wait... Connected to Phone. CPU: MT6260 Ver: CB00 SW:0000 Initialize Boot7 ... Phone not support on this boot, or cpu dead Waiting for USB Port... MTK Serial Port: COM10 Press and Holding Power button now ! Connecting, wait... Connected to Phone. CPU: MT6260 Ver: CB00 SW:0000 Initialize Boot7 ... Phone not support on this boot, or cpu dead Waiting for USB Port... User Abort Waiting for USB Port... User Abort Error usbport Waiting for USB Port... MTK Serial Port: COM10 Press and Holding Power button now ! Connecting, wait... Connected to Phone. CPU: MT6260 Ver: CB00 SW:0000 Initialize Boot7 ... Phone not support on this bWelcome to use McnBox! Selected COM32 Baud setting ... Set Baud done Initialize in progress ... Checking data ... Serial NWelcome to use McnBox! Selected COM32 Baud setting ... Set Baud done Initialize in progress ... Checking data ... Serial No. MCN2010xxxxxxxxx Firmware V1.15 Checksum 9B23-BBBE Software V3.59 Box Connected! Ready working at COM32 Press and Holding Power button now ! Connecting, wait... User Abort Waiting for USB Port... MTK Serial Port: COM10 Press and Holding Power button now ! Connecting, wait... Connected to Phone. CPU: MT6260 Ver: CB00 SW:0000 Initialize Boot7 ... Phone not support on this boot, or cpu dead Waiting for USB Port... MTK Serial Port: COM10 Open Port Error: *** Port was occupied. Waiting for USB Port... MTK Serial Port: COM10 Press and Holding Power button now ! Connecting, wait... Connected to Phone. CPU: