FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on phone in download mode (turn off phone, press vol.down + home + power).
5. Connect phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button. Operation: Flash
Selected model: SM-G900V
Software version: 23.4
File analysis... OK
Total file size: 0xA186D464 (2584 Mb)
Searching USB Flash Interface... detected COM45
Setup connection... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending sdi.mbn... OK
Sending NON-HLOS.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending cache.img.ext4... OK
Sending modem.bin... OK Flashing done (time - 00:04:23)
Done with Samsung Tool PRO v.23.4 |