View Single Post
Old 12-03-2015, 19:32   #49 (permalink)
papu3090
No Life Poster
 
papu3090's Avatar
 
Join Date: Sep 2008
Location: kutch, gujarat, india
Posts: 1,057
Member: 852566
Status: Offline
Thanks Meter: 464
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.

Z3X EasyJtag Software ver. 2.0.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:783 mV
CMD Active Level:2206 mV
Erasing 20000000 bytes from 00000000 ...ROM1
Erase Done.

Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 2.0.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:783 mV
CMD Active Level:2206 mV
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.

You must select a valid extCSD file first!
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\VTU00M_2329112007_20151 104_2335.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.0.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:783 mV
CMD Active Level:2206 mV
Writing...
Done.

You must select flash file first!
You must select flash file first!
Checking NAND Image : D:\samsung\EasyJTAG Tool\I9300 emmc\EMMC_ROM2_2Mb_BOOT\EMMC_ROM2_00000000_0020000 0.bin
File successefuly loaded!
Found ROM2 and automatically selected.
Processing file...D:\samsung\EasyJTAG Tool\I9300 emmc\EMMC_ROM2_2Mb_BOOT\EMMC_ROM2_00000000_0020000 0.bin
Z3X EasyJtag Software ver. 2.0.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:783 mV
CMD Active Level:2206 mV
Input file : D:\samsung\EasyJTAG Tool\I9300 emmc\EMMC_ROM2_2Mb_BOOT\EMMC_ROM2_00000000_0020000 0.bin
Writing 0000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Done. Write Speed: 902 kB/s

Checking NAND Image : D:\samsung\EasyJTAG Tool\I9300 emmc\EMMC_ROM1_512Mb_USER\EMMC_ROM1_00000000_20000 000.bin
File successefuly loaded!
Processing file...D:\samsung\EasyJTAG Tool\I9300 emmc\EMMC_ROM1_512Mb_USER\EMMC_ROM1_00000000_20000 000.bin
Z3X EasyJtag Software ver. 2.0.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:783 mV
CMD Active Level:2206 mV
Input file : D:\samsung\EasyJTAG Tool\I9300 emmc\EMMC_ROM1_512Mb_USER\EMMC_ROM1_00000000_20000 000.bin
Writing 0020000000 bytes to 00000000 ...ROM1 (USER ROM)
Done. Write Speed: 2520 kB/s

Z3X EasyJtag Software ver. 2.0.6.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 00000000000000000, ,FW Ver.: 01.52
CMD Pullup Level:773 mV
CMD Active Level:2196 mV
eMMC Device Information
EMMC CID : 15010056545530304DF18AD36DC77F38
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 07/2012 Rev.0xF1
EMMC NAME: VTU00M , S/N: 2329112007
EMMC NAME (HEX): 56545530304D00
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
Backup saved: VTU00M_2329112007_20151104_2357.extcsd
Done.





100% work i repair 50..pcs...........
  Reply With Quote
 
Page generated in 0.08338 seconds with 7 queries