Quote:
Originally Posted by jamesjerss SamsungGalaxy S3 Neo GT-I9300I Dead Boot Repair REQUIRMENTS 1) 16 GB SD card 2) Win32DiskImager 3) unbrick file 4) odin and stock firmware Download Win32DiskImager Download unbrick file Download Odin Download Stock Firmware For 4 file repair firmware Search tis file I9300IXXUAND1_I9300IOJVAND1 in z3x support or HWK support Procedure 1) install the Win32DiskImager 2) download and extract the debrick.zip u will find a debrick.img 3) insert sd card (16 GB class 4 or 10) and format it 4) open Win32DiskImager 5) open img file and write to sd card 6) after complete remove sd card from pc and insert it into your neo 7) insert back the battery and press vol down + home + power button 8) u will get into download mode 9) now remove your sd card from mobile 10) open odin and add your firmware and flash Note:Test nd post result |
<ID:0/126> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300IXXUAND1_I9300IOJVAND1_I9300IXXUAND1_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/126> Odin engine v(ID:3.1005)..
<ID:0/126> File analysis..
<ID:0/126> SetupConnection..
<ID:0/126> Initialzation..
<ID:0/126> Get PIT for mapping..
<ID:0/126> Firmware update start..
<ID:0/126> SingleDownload.
<ID:0/126> sbl1.mbn
<ID:0/126> NAND Write Start!!
<ID:0/126> aboot.mbn
<ID:0/126> rpm.mbn
<ID:0/126> tz.mbn
<ID:0/126> sdi.mbn
<ID:0/126> NON-HLOS.bin
<ID:0/126> boot.img
<ID:0/126> recovery.img
<ID:0/126> system.img.ext4
<ID:0/126> modem.bin
<ID:0/126> cache.img.ext4
<ID:0/126> hidden.img.ext4
<ID:0/126> RQT_CLOSE !!
<ID:0/126> RES OK !!
<ID:0/126> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/126> Removed!!
100% succeed