[Yashbanswara]

Hello I Need MJPhone M-1000 MTK-6261 ( 4MB )Firmware

Mobile All Information Here:

File_Info : HONGYU61M_11C_PCB01_gprs_MT6261_S00.A108C_KC02_A11 0_MUP_141106.bin
FileVersion : A108C_KC02_A110_MUP_141106

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 101 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 39402097756E6D64A9C1D1D72B5D6192
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000 
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
Reading Flash Conent now ... 

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : HONGYU61M_11C_PCB01_gprs_MT6261_S00.A108C_KC02_A110_MUP_141106.bin
FileVersion : A108C_KC02_A110_MUP_141106
Saved to : C:\InfinityBox\CM2MTK\Read_out\HONGYU61M_11C_PCB01_gprs_MT6261_S00.A108C_KC02_A110_MUP_141106.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

Thanks & Regards:
Gopal Parmar