Code:
Operation : Repair Security [ v1.43 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 613 ]
Sync...
Init Ok, waiting for phone ...
Reading initial info, wait...
Phone Info :
Security Info :
IMEI [1] : Damaged!
IMEI [2] : Damaged or not exists
Read Ok!
Update IMEI[1] to : 353446071220089 failed , record not exist or NVRAM damaged!
Update IMEI[2] to : 353446075720084 failed , record not exist or NVRAM damaged!
Done!
Elapsed: 00:05:34
Reconnect Power/Cable!
Code:
Operation : Repair Security [ v1.43 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 613 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D3332383F4D0042C92184EC
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D42004D3FEC84B2C9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : A42D39C36A72E9426B22E3B97FA28BB1
INT RAM : 0x00020000
EXT RAM : 0x80000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
IMEI [00] : 353446071220089
IMEI [01] : 353446075720084
Set IMEI [00] : 353446071220089
Set IMEI [01] : 353446075720084
Prepare finished. Security check required!
Wait for phone...
Phone found! [ 613 ]
Sync...
Device boot not done
Check Drivers
Try again
Error while post-checking procedure! Check drivers and battery charge!
In some cases - need reconnect mobile (just reinsert cable) on this step
Reconnect Power/Cable!
all drivers are installe uhave repaired many phones without problem
is there newest drivers for this cpu to repair emei