Action : Format UserData.
Selected 0-By CPU:MT6572_EMMC
Exe version: NCKBox AndroidMTK 1.8.6.5
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM373)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
EMMC FW VERSION: 58:00:00:00:00:00:00:00
EMMC CID: 7001004D4D4330 : 000000000000000000
EMMC UA SIZE: 0xe6800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe6c20000 [3.606 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM376)
Detecting format adress....wait!
FORMAT EMMC FLASH : BEGIN: 0x30340000 - LEN: 0x17800000
FORMAT EMMC FLASH : BEGIN: 0x47b40000 - LEN: 0x52c00000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
