Quote:
Originally Posted by JayDi Then SVC left as option for format.
For flash mode - only some pac will work.
Generic loaders will be updated only, when got such not working samples. |
now i find ver07 flash file for it (same ver. pac)
Code:
Card found: S/N : 32839D89 , v0130
Chinese Miracle II [SPD module] v 1.16
Loading : Intex_Aqua_Young_V07_Indian_SER_20160128.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : Intex_Aqua_Young_V07_Indian_SER_20160128
FastCheck : 0x00616422A5
Loading files ...
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : LOGO.bmp
File : LOGO.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin
File : SC7731_UMS.xml
Load Ok!
Operation : Flash [ v1.16 ]
======= Flash
Files set for flashing :
[ MCU ] : Intex_Aqua_Young_V07_Indian_SER_20160128.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : Intex_Aqua_Young_V07_Indian_SER_20160128
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : LOGO.bmp
File : LOGO.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 67 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now
[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!
[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : MODEM_W
Current File : SC7702_sc7731g_band128.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Error with code 0x0001
Elapsed: 00:03:14
Reconnect Power/Cable!
flashing start but erro when write user data on 99% now my handset goes to dead any solution for this now nv write error on set