EasyJtag Suite ver.: 2.1.1.1 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 8 (build 9200).
undefined
Android Explorer ver.: 1.0.0.5
eMMC ODIN ver.: 1.0.0.7
Successfully connected to box on COM3
Box S/N: xxxxxxxxxxxxxxx, ,FW Ver.: 01.55
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : xxxx-xxxx , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED , ACTIVATE NOW
Z3X Card Activation [SAMS] : NOT ACTIVATED , ACTIVATE NOW
Z3X Card Activation [JTAG] : ACTIVATED
Z3X EasyJtag Software ver. 2.1.1.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: xxxxxxxxxxxxxxx, ,FW Ver.: 01.55
CMD Pullup Level:1732 mV
CMD Active Level:2289 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower™ mode is off!
eMMC Device Information
EMMC CID : 15010051375853414201AE0DE6A4A118
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 10/2014 Rev.0x1
EMMC NAME: Q7XSAB , S/N: 2920146596
EMMC NAME (HEX): 51375853414200
EMMC ROM1 (Main User Data) Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: Q7XSAB_2920146596_20160525_0159.extcsd
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Warning: Entries Count = 52
MMCBLK0P0 (SBL1) Range: [0X4400,0X104200] ,Len: 100000
MMCBLK0P1 (PG1FS) Range: [0X104400,0X2104200] ,Len: 2000000
MMCBLK0P2 (BOARD_INFO) Range: [0X2104400,0X2108200] ,Len: 4000
MMCBLK0P3 (RESERVE_1) Range: [0X2108400,0X2FFFE00] ,Len: EF7C00
MMCBLK0P4 (MFG) Range: [0X3000000,0X303FE00] ,Len: 40000
MMCBLK0P5 (PG2FS) Range: [0X3040000,0X47EFA00] ,Len: 17AFC00
MMCBLK0P6 (SBL1_UPDATE) Range: [0X47EFC00,0X482FA00] ,Len: 40000
MMCBLK0P7 (RPM) Range: [0X482FC00,0X486FA00] ,Len: 40000
MMCBLK0P8 (TZ) Range: [0X486FC00,0X4A6FA00] ,Len: 200000
MMCBLK0P9 (SDI) Range: [0X4A6FC00,0X4A77A00] ,Len: 8000
MMCBLK0P10 (HBOOT) Range: [0X4A77C00,0X4E77A00] ,Len: 400000
MMCBLK0P11 (SP1) Range: [0X4E77C00,0X5377A00] ,Len: 500000
MMCBLK0P12 (HYP) Range: [0X5377C00,0X5577A00] ,Len: 200000
MMCBLK0P13 (WIFI) Range: [0X5577C00,0X5677A00] ,Len: 100000
MMCBLK0P14 (DDR) Range: [0X5677C00,0X567FA00] ,Len: 8000
MMCBLK0P15 (DSPS) Range: [0X567FC00,0X577FA00] ,Len: 100000
MMCBLK0P16 (WCNSS) Range: [0X577FC00,0X5C7FA00] ,Len: 500000
MMCBLK0P17 (RFG_0) Range: [0X5C7FC00,0X5D7FA00] ,Len: 100000
MMCBLK0P18 (RFG_1) Range: [0X5D7FC00,0X5E7FA00] ,Len: 100000
MMCBLK0P19 (RFG_2) Range: [0X5E7FC00,0X5F7FA00] ,Len: 100000
MMCBLK0P20 (RFG_3) Range: [0X5F7FC00,0X607FA00] ,Len: 100000
MMCBLK0P21 (RFG_4) Range: [0X607FC00,0X617FA00] ,Len: 100000
MMCBLK0P22 (RFG_5) Range: [0X617FC00,0X627FA00] ,Len: 100000
MMCBLK0P23 (RFG_6) Range: [0X627FC00,0X637FA00] ,Len: 100000
MMCBLK0P24 (RFG_7) Range: [0X637FC00,0X647FA00] ,Len: 100000
MMCBLK0P25 (FSG) Range: [0X647FC00,0X65FFA00] ,Len: 180000
MMCBLK0P26 (RADIO) Range: [0X65FFC00,0XB0FFE00] ,Len: 4B00400
MMCBLK0P27 (TOOL_DIAG) Range: [0XB100000,0XB4FFE00] ,Len: 400000
MMCBLK0P28 (RESERVE_2) Range: [0XB500000,0XBFFFE00] ,Len: B00000
MMCBLK0P29 (MISC) Range: [0XC000000,0XC0FFE00] ,Len: 100000
MMCBLK0P30 (MODEM_ST1) Range: [0XC100000,0XC27FE00] ,Len: 180000
MMCBLK0P31 (MODEM_ST2) Range: [0XC280000,0XC3FFE00] ,Len: 180000
MMCBLK0P32 (FATALDEVLOG) Range: [0XC400000,0XD7FFE00] ,Len: 1400000
MMCBLK0P33 (DEBUG_CONFIG) Range: [0XD800000,0XD800E00] ,Len: 1000
MMCBLK0P34 (PDATA) Range: [0XD801000,0XD840E00] ,Len: 40000
MMCBLK0P35 (CONTROL) Range: [0XD841000,0XD844E00] ,Len: 4000
MMCBLK0P36 (LOCAL) Range: [0XD845000,0XD985200] ,Len: 140400
MMCBLK0P37 (EXTRA) Range: [0XD985400,0XD995200] ,Len: 10000
MMCBLK0P38 (CDMA_RECORD) Range: [0XD995400,0XDA95200] ,Len: 100000
MMCBLK0P39 (FSC) Range: [0XDA95400,0XDA95600] ,Len: 400
MMCBLK0P40 (SSD) Range: [0XDA95800,0XDA97600] ,Len: 2000
MMCBLK0P41 (SKYLINK) Range: [0XDA97800,0XDAD7600] ,Len: 40000
MMCBLK0P42 (CARRIER) Range: [0XDAD7800,0XF3D7600] ,Len: 1900000
MMCBLK0P43 (DEVLOG) Range: [0XF3D7800,0X107D7600] ,Len: 1400000
MMCBLK0P44 (BACKUP_HBOOT) Range: [0X107D7800,0X10CD7600] ,Len: 500000
MMCBLK0P45 (RESERVE) Range: [0X10CD7800,0X12FFFE00] ,Len: 2328800
MMCBLK0P46 (BOOT) Range: [0X13000000,0X13FFFE00] ,Len: 1000000
MMCBLK0P47 (RECOVERY) Range: [0X14000000,0X14FFFE00] ,Len: 1000000
MMCBLK0P48 (CACHE) Range: [0X15000000,0X28FFFE00] ,Len: 14000000
MMCBLK0P49 (SYSTEM) Range: [0X29000000,0XC8FFFE00] ,Len: A0000000
MMCBLK0P50 (USERDATA) Range: [0XC9000000,0X1D0FFFE00] ,Len: 108000000
Done...Presets has been updated...
Done.
Z3X EasyJtag Software ver. 2.1.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1732 mV
CMD Active Level:2289 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
Reading 0x0001D0FFFE00 bytes from 0x000000000000 ...ROM1 ( USER ROM)
Output file :H:\GSM\Z3X\Desire 510\EMMC_ROM1_Q7XSAB_2920146596_00000000_1D0FFFE00 .bin
Pinout
