Quote:
Originally Posted by Fune4u  Z3X EasyJtag Software ver. 2.3.0.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0100101C23C20968, ,FW Ver.: 01.55CMD Pullup Level:752 mV
CMD Active Level:2248 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------EMMC CID : 15010056545530304DF1881440E77F34
EMMC CSD : D02701320F5903FFF6DBFFFF8E406008
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 07/2012 Rev.0xF1
EMMC NAME: VTU00M , S/N: 2283028711
EMMC NAME (HEX): 56545530304D00
Can't init EMMC, Reason: DATA RCV CRC Error
Check Data Line!
Done. |
Hi,
Try to select different eMMC Voltage settings in software (1.8, 2.8, 3.3), make sure that GND line is short and has low resistance.
Also in some cases pull-up resistor is helpfull:
https://gyazo.com/02760615915efa1289934b4dc3530017
Best Regards
Best Regards