Quote:
Originally Posted by neeraj1st Waiting phone ...
Connect battery, press and hold 'VolUP' + 'PowerOn' buttons
Connect USB cable and keep hold buttons, until phone will be detected
Device found!
Handshake Ok!
[PDL] : Setting FlashMode ...
[PDLBoot] : Sending First PDL ...
[PDLBoot] : First Boot Ok!
[PDLBoot] : Sending Second PDL ...
[PDLBoot] : Second Boot Ok!
Boot Finished!
Handshake with FL Ok!
Factory Defaults Enabled, will reset UserData and Settings!
Format UDA partition ...
Format USER Ok
[PDLFlash] : Sending All Images
[PDLFlash] : Processing now BOOTLOADER
File : Intex_Aqua_R3_V13_Indian_rda_total.bin
Flashing ...
[PDLFlash] : Flash region done!
[PDLFlash] : Processing now BOOT
File : Intex_Aqua_R3_V13_Indian_rda_total.bin
Flashing ...
[PDLFlash] : ERROR! PartitionFinalize rejected! Check FlashFile and connection!
Flashing Done!
Reboot Phone
Elapsed: 00:00:28
Reconnect Power/Cable! |
U should update driver from intex aqua r3 folder or spice xlife driver folder..... And it will be make two driver one of the show in Port and second show in universal driver area...... If the problem same then u should change the port.... 10000% ur problem will be solve.... Remember that the mobile should be connect always in cpu back side area not to front.....
Sent from my Redmi Note 3 using Tapatalk