Dead Samsung i9260 with emmc KMVTU000LM-B503. Log:
Code:
Z3X EasyJtag Software ver. 1.9.1.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: xxx, ,FW Ver.: 01.52
CMD Pullup Level:1990 mV
CMD Active Level:2175 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C
EMMC CSD : 902701320F5903FFF6DBFFEF8A404022
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC NAME (HEX): 30303030303000
EMMC ROM1 (Main User Data) Capacity: 16384 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20150305_2042.extcsd
Done.
eMMC firmware update log:
Code:
Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KMVTU000LM-B503
Z3X EasyJtag Software ver. 1.9.1.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: , ,FW Ver.: 01.52
CMD Pullup Level:2124 mV
CMD Active Level:2475 mV
Setup firmware update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now!
Please reconnect all eMMC lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.
Log after firmware update:
Code:
Z3X EasyJtag Software ver. 1.9.1.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: , ,FW Ver.: 01.52
CMD Pullup Level:2062 mV
CMD Active Level:2454 mV
eMMC Device Information
EMMC CID : 15010056545530304DFC3D39868641FA
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xFC
EMMC NAME: VTU00M , S/N: 1027180166
EMMC NAME (HEX): 56545530304D00
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: VTU00M_1027180166_20150305_2057.extcsd
Done.
Repair extCSD from backup:
Code:
extCSD file...D:\Mobile\Z3X\EASYJTAG\Backups\VTU00M_1449093984_20150202_1345.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 1.9.1.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2062 mV
CMD Active Level:2454 mV
Writing...
Done.
Change BOOT CONFIG to ROM1:
Code:
Running:Change BOOT CONFIG...
Z3X EasyJtag Software ver. 1.9.1.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2041 mV
CMD Active Level:2351 mV
Writing eMMC Register...
Written: REG : 179 VAL :0
Done.
Z3X EasyJtag Software ver. 1.9.1.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0707FD0E00DF994B, ,FW Ver.: 01.52
CMD Pullup Level:2134 mV
CMD Active Level:2505 mV
eMMC Device Information
EMMC CID : 15010056545530304DFC3D39868641FA
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xFC
EMMC NAME: VTU00M , S/N: 1027180166
EMMC NAME (HEX): 56545530304D00
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x00.
Backup saved: VTU00M_1027180166_20150305_2147.extcsd
Done.
Write dump from support:
Code:
Checking NAND Image : D:\Mobile\Z3X\EASYJTAG\!Repair Files\Samsung\i9260\Samsung_GT-i9260_XXAMC3_16Gb_model_dump_rom1_1GB.bin
File successefuly loaded!
Processing file...D:\Mobile\Z3X\EASYJTAG\!Repair Files\Samsung\i9260\Samsung_GT-i9260_XXAMC3_16Gb_model_dump_rom1_1GB.bin
Z3X EasyJtag Software ver. 1.9.1.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2134 mV
CMD Active Level:2505 mV
Input file : D:\Mobile\Z3X\EASYJTAG\!Repair Files\Samsung\i9260\Samsung_GT-i9260_XXAMC3_16Gb_model_dump_rom1_1GB.bin
Writing 0040000000 bytes to 00000000 ...ROM1 (USER ROM)
Done. Write Speed: 12813 kB/s
Flash from Odin!
Done.
