| Samsung S7 after flashing combination file cant flash the factory firmware.
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on phone in download mode (turn off phone, press vol.down + home + power).
5. Connect phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-G930F
Software version: 27.1
File analysis... ok
Total file size: 0x08B61DF0 (139 Mb)
Searching USB Flash interface... COM7 detected
Setup connection... ok
Reading PIT from phone... ok
Sending sboot.bin... ok
Sending param.bin... ok
Sending cm.bin... ok
Sending boot.img... ok
Sending recovery.img... ok
Sending system.img... error
Done with Samsung Tool PRO v.27.1
tried many firmware , old version and new version same. its UK 3 network phone, only can flash the combination file not other firmware file. |