Quote:
Originally Posted by zebafridi HOTWAV venus x11 Write Failed
all CPU check but not work
Chinese Miracle II [SPD module] v 1.24
Loading : T13_HOTWAV_USER_2SIM_64+4_B1_A5_201605242024.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : T13_HOTWAV_USER_2SIM_64+4_B1_A5_201605242024
FastCheck : 0x0051DBACC7
Loading files ...
File : fdl1.bin
File : fdl2.bin
File : nvitem T13 b1+b5 with RDA RAMP&CAL&AUDIO.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_pike_modem.bin
File : DSP_DM_G2.bin
File : SC8800G_pike_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : oem.img
File : persist.img
File : sysinfo.img
File : userdata.img
File : hotwav.bmp
File : htc.bmp
File : huawei.bmp
File : cache.img
File : u-boot.bin
File : SC77xx.xml
Load Ok!
Operation : Flash [ v1.24 ]
======= Flash
Files set for flashing :
[ MCU ] : T13_HOTWAV_USER_2SIM_64+4_B1_A5_201605242024.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : T13_HOTWAV_USER_2SIM_64+4_B1_A5_201605242024
File : fdl1.bin
File : fdl2.bin
File : nvitem T13 b1+b5 with RDA RAMP&CAL&AUDIO.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_pike_modem.bin
File : DSP_DM_G2.bin
File : SC8800G_pike_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : oem.img
File : persist.img
File : sysinfo.img
File : userdata.img
File : hotwav.bmp
File : htc.bmp
File : huawei.bmp
File : cache.img
File : u-boot.bin
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 12 ]
Port Opened
Sync...
Initial Boot Failed!
Reconnect Power/Cable! |
It's driver conflict Problem remove reinstall Driver it will help you.