View Single Post
Old 11-19-2016, 12:26   #2 (permalink)
galaxycompue
No Life Poster
 
Join Date: Nov 2014
Posts: 844
Member: 2298369
Status: Offline
Thanks Meter: 390
WHEN I TRY TO READ FIRMWARE IT SAY-

Card found : S/N : 94FBD840 , v0134
Infinity-Box Qualcomm Module [QLM] v 1.03


Operation : Reset Settings [ v1.03 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Reset Settings [ v1.03 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 1D8E3408
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 5BF3348E5AA193BB
ID_BLOCK_L : C060A78CF2F2A277
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP ( Google Reset Protection )
FRP removed!

Done!
Elapsed: 00:00:33

Reconnect Power/Cable!

Operation : Read Flash [ v1.03 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read Flash [ v1.03 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 1D8E3408
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 5BF3348E5AA193BB
ID_BLOCK_L : C060A78CF2F2A277
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand : OPPO
ProdName : A37f
ProdModel : A37f
AndroidVer: 5.1.1
Manufact. : OPPO
QLMxCPU : MSM8916

DevInfo : MSM8916__OPPO__OPPO__ANDR_v5.1.1__A37f__A37f

ReportFile : C:\InfinityBox\CM2QLM\QLM_report.log

Info : Device is not supported yet!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!
  Reply With Quote
 
Page generated in 0.18306 seconds with 6 queries