infreno team please hep me q mobile x6i 3g SPD CPU 7715
after flash dead
new mobile x6i pac file read after flash not connected
dead boot reaper plaze help
Loading : QMobileX6i_MP_20151010_ENG.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC7715_NAND
PacVersion : QMobileX6i_MP_20151010
FastCheck : 0x0022249CAA
Loading files ...
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : prodnv_b256k_p4k.img
File : u-boot-spl-16k.bin
File : SC7702_sc7715_modem.bin
File : DSP_DM_G2.bin
File : SC8800G_sc7715_wcn_modem.bin
File : LOGO.bmp
File : boot.img
File : system_b256k_p4k.img
File : cache_b256k_p4k.img
File : recovery.img
File : userdata_b256k_p4k.img
File : u-boot.bin
File : prodnv_b128k_p2k.img
File : system_b128k_p2k.img
File : cache_b128k_p2k.img
File : userdata_b128k_p2k.img
File : SC7715.xml
Load Ok!
Operation : Flash [ v1.24 ]
======= Flash
Files set for flashing :
[ MCU ] : QMobileX6i_MP_20151010_ENG.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC7715_NAND
PacVersion : QMobileX6i_MP_20151010
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : prodnv_b256k_p4k.img
File : u-boot-spl-16k.bin
File : SC7702_sc7715_modem.bin
File : DSP_DM_G2.bin
File : SC8800G_sc7715_wcn_modem.bin
File : LOGO.bmp
File : boot.img
File : system_b256k_p4k.img
File : cache_b256k_p4k.img
File : recovery.img
File : userdata_b256k_p4k.img
File : u-boot.bin
File : prodnv_b128k_p2k.img
File : system_b128k_p2k.img
File : cache_b128k_p2k.img
File : userdata_b128k_p2k.img
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 27 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
PMTManager : Load 0x16 records
PMTManager : PMT Update Failed!!!
Selected firmware doesn't match to current HW or EMPTY battery!
Flashing terminated!
Elapsed: 00:00:00
Reconnect Power/Cable! |