Hi, I am looking urgently for readed fw for redmi 3, my device totaly dead, only qualcomm 9008 driver, Miflash always error flashing: firehose/send configure command failed / i use IDO fastboot rom/, only CM2QLM can read fw and flash fw
i think it is redmi 3 pro, imei is: 860635039051927, sn: 12854/00045560 200, battery BM47
thanks for any help
Code:
Operation : Read Flash [ v1.07 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0635F7B8
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : 561370AE1E15DB9E3749174EC2B0488F
ID_BLOCK_L : FFF973D2E534DE0CCB5277720D79A518
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!
DevInfo : MSM89xx
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8936 / eMMC
Firmware Size : 2650 MiB