Code:
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
Backup saved: VTU00M_1027180166_20170208_1853.extcsd
Searching for partition tables...
Detected GPT over MBR...
Warning: Header Size = 512 (expected 92)
Medium UUID: 52444E41-494F-2044-4D4D-43204449534B
Warning: Entries Count = 128
MMCBLK0P0 (BOTA0) Range: [0X400000,0X7FFE00] ,Len: 400000
MMCBLK0P1 (BOTA1) Range: [0X800000,0XBFFE00] ,Len: 400000
MMCBLK0P2 (EFS) Range: [0XC00000,0X1FFFE00] ,Len: 1400000
MMCBLK0P3 (M9KEFS1) Range: [0X2000000,0X23FFE00] ,Len: 400000
MMCBLK0P4 (M9KEFS2) Range: [0X2400000,0X27FFE00] ,Len: 400000
MMCBLK0P5 (M9KEFS3) Range: [0X2800000,0X2BFFE00] ,Len: 400000
MMCBLK0P6 (PARAM) Range: [0X2C00000,0X33FFE00] ,Len: 800000
MMCBLK0P7 (BOOT) Range: [0X3400000,0X3BFFE00] ,Len: 800000
MMCBLK0P8 (RECOVERY) Range: [0X3C00000,0X43FFE00] ,Len: 800000
MMCBLK0P9 (RADIO) Range: [0X4400000,0X9BFFE00] ,Len: 5800000
MMCBLK0P10 (TOMBSTONES) Range: [0X9C00000,0X9FFFE00] ,Len: 400000
MMCBLK0P11 (CACHE) Range: [0XA000000,0X5F7FFE00] ,Len: 55800000
MMCBLK0P12 (SYSTEM) Range: [0X5F800000,0XDF7FFE00] ,Len: 80000000
MMCBLK0P13 (HIDDEN) Range: [0XDF800000,0X1027FFE00] ,Len: 23000000
MMCBLK0P14 (OTA) Range: [0X102800000,0X102FFFE00] ,Len: 800000
MMCBLK0P15 (USERDATA) Range: [0X103000000,0X3AAFFFE00] ,Len: 2A8000000
Done...Presets has been updated...
Done.
Running:SAMSUNG: Read S.M.A.R.T Report...
Z3X EasyJtag Software ver. 2.0.6.6
Skip loading eMMC Addon Firmware
CMD Pullup Level:1330 mV
CMD Active Level:2681 mV
Reading S.M.A.R.T
S.M.A.R.T Ver. 0 , Card Error mode : Normal
Super Block size : 0x00800000 (8388608 bytes)
Super Page size : 0x00004000 (16384 bytes)
Optimal Write size : 0x00010000 (65536 bytes)
Read Reclaim count : 12
Optimal TRIM size : 0x00002000 (8192 bytes)
Total Number of banks : 4
Initial bad blocks per bank : 2,3,1,2
Runtime bad blocks per bank : 3,3,1,5
Reserved blocks left per bank : 46,45,49,45
All Erase counts (min,avg,max): 1,18,1504
SLC Erase counts (min,avg,max): 3,209,1504
MLC Erase counts (min,avg,max): 1,8,25
S.M.A.R.T Report Done.
Running:SAMSUNG: eMMC firmware update...
EMMC NAME: VTU00M
Z3X EasyJtag Software ver. 2.0.6.6
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 0C007015319CF9D5, ,FW Ver.: 01.56
CMD Pullup Level:1330 mV
CMD Active Level:2670 mV
Setup firmware update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now!
Please reconnect all eMMC lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.
Running:SAMSUNG: eMMC firmware update...
EMMC NAME: VTU000
Confirmed eMMC Part Number: KMVTU000LM-B503
Z3X EasyJtag Software ver. 2.0.6.6
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 0C007015319CF9D5, ,FW Ver.: 01.56
CMD Pullup Level:1320 mV
CMD Active Level:2670 mV
Setup firmware update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now!
Please reconnect all eMMC lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.
Z3X EasyJtag Software ver. 2.0.6.6
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 0C007015319CF9D5, ,FW Ver.: 01.56
CMD Pullup Level:1340 mV
CMD Active Level:2670 mV
eMMC Device Information
EMMC CID : 1501005654553030300C20138686416E
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xC
EMMC NAME: VTU000 , S/N: 538150534
EMMC NAME (HEX): 56545530303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
Backup saved: VTU000_ 538150534_20170208_1857.extcsd
Searching for partition tables...
Partitioning not detected...
Done.
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:1340 mV
CMD Active Level:2670 mV
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.
Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 2.0.6.6
Skip loading eMMC Addon Firmware
CMD Pullup Level:1340 mV
CMD Active Level:2670 mV
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.
extCSD file...D:\EMMC REPAIR\n7100 tested hanif\N7100 EXTCSD\N7100 EXTCSD.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.0.6.6
Skip loading eMMC Addon Firmware
CMD Pullup Level:1340 mV
CMD Active Level:2670 mV
Writing...
Done.
Checking NAND Image : D:\EMMC REPAIR\n7100 tested hanif\N7100 BOOT1\N7100 BOOT1.bin
File successefuly loaded!
Processing file...D:\EMMC REPAIR\n7100 tested hanif\N7100 BOOT1\N7100 BOOT1.bin
Z3X EasyJtag Software ver. 2.0.6.6
Skip loading eMMC Addon Firmware
CMD Pullup Level:1340 mV
CMD Active Level:2670 mV
Input file : D:\EMMC REPAIR\n7100 tested hanif\N7100 BOOT1\N7100 BOOT1.bin
Writing 0000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Done. Write Speed: 1268 kB/s
Checking NAND Image : D:\EMMC REPAIR\n7100 tested hanif\N7100 USERAREA.bin
File successefuly loaded!
Processing file...D:\EMMC REPAIR\n7100 tested hanif\N7100 USERAREA.bin
Z3X EasyJtag Software ver. 2.0.6.6
Skip loading eMMC Addon Firmware
CMD Pullup Level:1340 mV
CMD Active Level:2670 mV
Input file : D:\EMMC REPAIR\n7100 tested hanif\N7100 USERAREA.bin
Writing 0001000000 bytes to 00000000 ...ROM1 (USER ROM)
Done. Write Speed: 1272 kB/s
Z3X EasyJtag Software ver. 2.0.6.6
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 0C007015319CF9D5, ,FW Ver.: 01.56
CMD Pullup Level:1330 mV
CMD Active Level:2660 mV
eMMC Device Information
EMMC CID : 1501005654553030300C20138686416E
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xC
EMMC NAME: VTU000 , S/N: 538150534
EMMC NAME (HEX): 56545530303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
Backup saved: VTU000_ 538150534_20170208_1859.extcsd
Searching for partition tables...
Detected GPT over MBR...
Warning: Header Size = 512 (expected 92)
Medium UUID: 52444E41-494F-2044-4D4D-43204449534B
Warning: Entries Count = 128
MMCBLK0P0 (BOTA0) Range: [0X400000,0X7FFE00] ,Len: 400000
MMCBLK0P1 (BOTA1) Range: [0X800000,0XBFFE00] ,Len: 400000
MMCBLK0P2 (EFS) Range: [0XC00000,0X1FFFE00] ,Len: 1400000
MMCBLK0P3 (M9KEFS1) Range: [0X2000000,0X23FFE00] ,Len: 400000
MMCBLK0P4 (M9KEFS2) Range: [0X2400000,0X27FFE00] ,Len: 400000
MMCBLK0P5 (M9KEFS3) Range: [0X2800000,0X2BFFE00] ,Len: 400000
MMCBLK0P6 (PARAM) Range: [0X2C00000,0X33FFE00] ,Len: 800000
MMCBLK0P7 (BOOT) Range: [0X3400000,0X3BFFE00] ,Len: 800000
MMCBLK0P8 (RECOVERY) Range: [0X3C00000,0X43FFE00] ,Len: 800000
MMCBLK0P9 (RADIO) Range: [0X4400000,0X9BFFE00] ,Len: 5800000
MMCBLK0P10 (TOMBSTONES) Range: [0X9C00000,0X9FFFE00] ,Len: 400000
MMCBLK0P11 (CACHE) Range: [0XA000000,0X5F7FFE00] ,Len: 55800000
MMCBLK0P12 (SYSTEM) Range: [0X5F800000,0XDF7FFE00] ,Len: 80000000
MMCBLK0P13 (HIDDEN) Range: [0XDF800000,0X1027FFE00] ,Len: 23000000
MMCBLK0P14 (OTA) Range: [0X102800000,0X102FFFE00] ,Len: 800000
MMCBLK0P15 (USERDATA) Range: [0X103000000,0X3AAFFFE00] ,Len: 2A8000000
Done...Presets has been updated...
Done.
Running:SAMSUNG: Read S.M.A.R.T Report...
Z3X EasyJtag Software ver. 2.0.6.6
Skip loading eMMC Addon Firmware
CMD Pullup Level:1330 mV
CMD Active Level:2660 mV
Reading S.M.A.R.T
S.M.A.R.T Ver. 0 , Card Error mode : Normal
Super Block size : 0x00800000 (8388608 bytes)
Super Page size : 0x00004000 (16384 bytes)
Optimal Write size : 0x00010000 (65536 bytes)
Read Reclaim count : 0
Optimal TRIM size : 0x00002000 (8192 bytes)
Total Number of banks : 4
Initial bad blocks per bank : 6,6,2,6
Runtime bad blocks per bank : 0,0,0,0
Reserved blocks left per bank : 45,45,49,45
All Erase counts (min,avg,max): 0,0,2
SLC Erase counts (min,avg,max): 0,0,2
MLC Erase counts (min,avg,max): 0,0,2
S.M.A.R.T Report Done.